BS EN 14803:2006 – Identification and/or determination of the quantity of waste
1 Scope
This European Standard specifies general requirements and verifications for methods of identification of waste containers and/or determination of the quantity of waste including:
safety requirements;
interface requirements and performances;
data to be treated and their integrity.
This European Standard is applicable to systems for handling containers conforming to EN 840.
NOTE Although this European Standard does not cover systems for handling containers not conforming to EN 840, it is recommended to apply the requirements of this document to these systems as far as possible.
This European Standard is applicable to systems both for billing and not for billing.
2 Normative references
The following referenced documents are indispensable for the application of this European Standard. For dated references, only the edition cited applies. For undated references, the latest edition of the referenceddocument (including any amendments) applies.
EN 840-1 , Mobile waste containers — Part 1: Containers with 2 wheels with a capacity up to 400 l for comb lifting devices — Dimensions and design
EN 840-2, Mobile waste containers — Part 2: Containers with 4 wheels, with a capacity up to 1 300 l with flat (lid(s), for trunnion and/or comb lifting devices — Dimensions and design
EN 840-3, Mobile waste containers — Part 3: Containers with 4 wheels with a capacity up to 1 300 l with dome lid(s), for trunnion and/or comb lifting devices — Dimensions and design
EN 840-4, Mobile waste containers — Part 4: Containers with 4 wheels with a capacity up to 1 700 l with flat lid(s), for wide trunnion or BG- and/or wide comb lifting devices — Dimensions and design
EN 840-5, Mobile waste containers — Part 5: Performance requirements and test methods
EN 840-6, Mobile waste containers — Part 6: Safety and health requirements
EN 1 501 (all parts), Refuse collection vehicles and their associated lifting devices — General requirements and safety requirements
EN 45501 :1 992, Metrological aspects of non-automatic weighing instruments
EN 60068-2-1 , Environmental testing — Part 2: Tests; tests A: Cold (IEC 60068-2-1:1990)
EN 60068-2-2, Basic environmental testing procedures — Part 2: Tests — Tests B: Dry heat
(IEC 60068 2-2:1974 + IEC 60068-2-2A:1976)
EN 60068-2-6, Environmental testing — Part 2: Tests — Test Fc: Vibration (sinusoidal) (IEC 60068-2-6:1995 + Corrigendum 1995)
EN 60068-2-27, Basic environmental testing procedures — Part 2: Tests — Test Ea and guidance: Shock (IEC 60068-2-27:1987)
BS EN 14803:2006 – Identification and/or determination of the quantity of waste