BS EN 14316-1:2004 – Thermal insulation products for buildings — In- situ thermal insulation formed from expanded perlite (EP) products — Part 1: Specification for bonded and loose-fill products before installation
1 Scope
This document specifies the requirements covering the four product types of expanded perlite products Perlite Aggregate (EPA), Coated Perlite (EPC), Hydrophobic Perlite (EPH) and Premixed Perlite (EPM), containing less than 1 % organic material as defined by annex D for in-situ insulation of roofs, ceilings, walls and floors.
This document is a specification for the insulation products before installation.
This document describes the product characteristics and includes procedures for testing, evaluation of conformity, marking and labelling.
This document does not specify the required level of a given property to be achieved by a product to demonstrate fitness for purpose in a particular application. The levels required for a given application are to be found in regulations or non-conflicting standards.
This document does not cover factory made insulation products of formed shapes and boards made with expanded perlite or in-situ products intended to be used for the insulation of building equipment and industrial installations.
This document does not specify performance requirements for airborne sound insulation and for acoustic absorption applications.
2 Normative references
The following referenced documents are indispensable for the application of this document. For dated references, only the edition cited applies. For undated references, the latest edition of the referenceddocument (including any amendments) applies.
EN 932-1 , Tests for general properties of aggregates — Part 1: Methods for sampling.
EN 932-2, Tests for general properties of aggregates — Part 2: Methods for reducing laboratory samples.
EN 933-1 , Tests for geometrical properties of aggregates — Part 1: Determination of particle size distribution — Sieving method.
EN 1 097-3, Tests for mechanical and physical properties of aggregates — Part 3: Determination of loose bulk density and voids.
EN 1 2667, Thermal performance of building materials and products — Determination of thermal resistance by means of guarded hot plate and heat flow meter methods — Products of high and medium thermal resistance.
EN 1 3055-1 , Lightweight aggregates — Part 1: Lightweight aggregates for concrete, mortar and grout.
EN 1 31 72:2001 , Thermal insulating products — Evaluation of conformity.
EN 1 3820, Thermal insulating materials for building applications — Determination of organic content.
EN 1 3055-2, Lightweight aggregates — Part 2: Lightweight aggregates for bituminous mixtures and surface treatments and for unbound and bound applications.
BS EN 14316-1:2004 – Thermal insulation products for buildings — In- situ thermal insulation formed from expanded perlite (EP) products — Part 1: Specification for bonded and loose-fill products before installation