EN 10207:2005 – Steels for simple pressure vessels – Technical delivery requirements for plates, strips and bars

EN 10207:2005 - Steels for simple pressure vessels - Technical delivery requirements for plates, strips and bars

1 Scope
This document specifies the technical delivery requirements for flat products and bars made of steel in accordance with the specifications for pressurized parts in simple pressure vessels as defined in the Directive 87/404/EEC(see Annex A) and standardized in EN 286-1 to -3.
2 Normative references
The following referenced documents are indispensable for the application of this document. For dated references,only the edition cited applies. For undated references, the latest edition of the referenced document (including any amendments) applies.
EN 10002-1, Metallic materials — Tensile testing — Part 1: Method of testing at ambient temperature.
EN 10002-5, Metallic materials — Tensile testing — Part 5: Method of testing at elevated temperatures.
EN 10020:2000, Definition and classification of grades of steel.
EN 10021:1993, General technical delivery requirements for steel and iron products.
prEN 10027-1, Designation systems for steel — Part 1: Steel names.
EN 10027-2, Designation systems for steels — Part 2: Numerical system.
EN 10029, Hot rolled steel plates 3 mm thick or above — Tolerances on dimensions, shape and mass.
EN 10045-1, Metallic materials — Charpy impact test — Part 1: Test method.
EN 10048, Hot rolled narrow steel strip — Tolerances on dimensions and shape.
EN 10051, Continuously hot rolled uncoated plate, sheet and strip of non–alloy and alloy steels — Tolerances on dimensions and shape.
EN 10052:1993, Vocabulary of heat treatment terms for ferrous products.
EN 10058, Hot rolled flat steel bars for general purposes — Dimensions and tolerances on shape and dimensions.
EN 10059, Hot rolled square steel bars for general purposes — Dimensions and tolerances on shape and dimensions.
EN 10060, Hot rolled round steel bars for general purposes — Dimensions and tolerances on shape and dimensions.
EN 10061, Hot rolled hexagon steel bars for general purposes — Dimensions and tolerances on shape and dimensions.
EN 10079:1992, Definition of steel products.
EN 10160, Ultrasonic testing of steel flat products of thickness equal or greater than 6 mm (reflection method).
EN 10163-2, Delivery requirements for surface condition of hot rolled steel plates, wide flats and sections – Part 2:Plate and wide flats.
EN 10168, Steel products — Inspection documents — List of information and description.
EN 10204:2004, Metallic products — Types of inspection documents.
EN 10207:2005 – Steels for simple pressure vessels – Technical delivery requirements for plates, strips and bars

Leave a Reply

Your email address will not be published. Required fields are marked *